Electric Motor

Product Overview

 

This three-phase squirrel-cage induction motor is designed for industrial drive applications, including pumps, fans, compressors, conveyors, and other industrial machinery. The product range is rated with outputs from 0.75 kW to 315 kW, IEC frame sizes from 80 to 355, and 2-, 4-, 6-, and 8-pole configurations.
Available configurations include foot-mounted, flange-mounted, and combined mounting arrangements. Electrical ratings, mounting dimensions, enclosure protection, cooling arrangements, and efficiency class should be confirmed for the selected model before ordering.
The motor range is intended for applications operating on 50 Hz or 60 Hz electrical supplies, subject to the rated specifications of each model.

 

 

Key Features and Technical Characteristics

 

 

Efficiency Options
IE3 and IE4 efficiency-class options are listed for the product range. The applicable efficiency class depends on the selected model and must be confirmed against its rated output, pole configuration, frequency, and supporting technical documentation.
Insulation and Thermal Management
The stated insulation system is Class F. Temperature-rise limits, permissible ambient temperatures, and operating restrictions must be confirmed in the model-specific technical datasheet.
For applications involving elevated ambient temperatures or reduced-speed operation, the required operating limits, cooling arrangement, and any output derating should be reviewed with the manufacturer.
Housing and Mechanical Construction
The stated housing options include ribbed cast iron for applicable frame sizes and aluminum housing for smaller sizes up to frame 132, subject to model availability.
The cast iron housing material is specified as EN-GJL-200 in the original product information. Actual housing material, mechanical dimensions, and allowable shaft loads should be confirmed for the selected model.
Enclosure Protection
IP55 is listed as the standard enclosure protection level, with IP56 and IP65 available as stated options. Availability and protection ratings must be verified for the complete motor assembly and intended installation conditions.
Rotor Balancing
The stated rotor-balancing specification is Grade G2.5 using half-key balancing. The applicable balancing standard, rotor scope, and supporting balancing records should be confirmed before publication or technical approval.
Bearing life and vibration performance depend on the motor configuration, installation, load conditions, and maintenance practices.

 

Technical Specifications

 

Technical Parameter

Stated Specification Range

Rated output power

0.75-315 kW

IEC frame size

80-355

Number of poles

2, 4, 6, or 8

Supply frequency

50 Hz or 60 Hz, subject to model rating

Rated voltage

Model-specific; confirm voltage and winding connection

Efficiency class

IE3 / IE4, subject to model availability and documentation

Enclosure protection

IP55 standard as stated; IP56 / IP65 options subject to confirmation

Cooling method

IC411 as stated; confirm for the selected model

Duty type

S1 as stated; confirm for the selected model

Bearing arrangement

Deep groove ball bearings; confirm bearing type and configuration

Product conformity documentation

Confirm applicable documents and covered models

Quality management certification

Confirm certificate scope and validity separately from product conformity

 

Mounting Configurations

The following mounting configurations are listed for the product range, subject to model availability.

Foot-Mounted

A horizontal mounting arrangement with base feet. Suitable for compatible installations where the motor is supported by a mounting base or machine frame.

 

Flange-Mounted

A flange-mounted arrangement for compatible direct-coupled applications. The flange dimensions, locating pilot, bolt pattern, and shaft interface must match the driven equipment.

Foot- and Flange-Mounted

A combined mounting arrangement incorporating feet and a flange. Confirm the available frame sizes and mounting dimensions for the selected configuration.

 

Vertical Mounting

A vertical mounting arrangement for compatible vertical-drive applications. Allowable axial and radial shaft loads, bearing configuration, and installation requirements must be confirmed before selection.

 

 

Industrial Applications

Centrifugal Pumps: For compatible pump-drive applications in water supply, fluid transfer, and industrial process systems. Motor selection should consider the required output, operating speed, starting conditions, and mounting interface.


HVAC Fans and Industrial Blowers: For compatible ventilation, air-handling, and industrial fan-drive systems. The selected motor should match the required power, speed, duty cycle, cooling arrangement, and installation conditions.


Conveyors and Material Handling Equipment: For compatible conveyor and material-handling drives. Starting torque, load profile, transmission arrangement, and operating cycle should be evaluated during motor selection.


Air Compressors: For compatible compressor-drive applications, including screw and reciprocating compressor systems where the selected motor meets the application requirements. Starting conditions, load characteristics, rated power, and duty cycle should be reviewed before ordering.

Three-phase Asynchronous Motor

 

Manufacturing and Quality Control

 

Stator Winding: The stated manufacturing process includes automated coil insertion and vacuum pressure impregnation (VPI) using solvent-free Class H resin. The scope of VPI processing, resin specifications, insulation-system classification, and associated quality records should be confirmed for the relevant product range.


Machining and Dimensional Inspection: CNC machining is listed as part of the manufacturing process for motor housings and end shields. Dimensional tolerances, concentricity requirements, bearing-seat specifications, and inspection methods should be defined by the applicable engineering drawings and inspection records.


Rotor Manufacturing: The stated rotor manufacturing process uses high-pressure aluminum die casting. Casting integrity, rotor quality, and electrical performance should be evaluated according to the manufacturer's applicable inspection procedures and test records. Specific claims concerning porosity or electrical performance should be supported by relevant evidence.

 

Customization Options
 

Electrical Configuration: Special rated voltages and frequency requirements may be submitted for engineering review. Availability depends on the selected motor model and the approved electrical design.

 

Thermal Monitoring: PTC thermistors and Pt100 resistance temperature detectors may be specified, subject to confirmation of sensor type, temperature rating, installation location, wiring arrangement, and model compatibility.

 

Shaft Design: Non-standard shaft diameters, shaft lengths, dual shaft extensions, and alternative shaft materials may be reviewed against the application drawing and manufacturing feasibility. Where stainless steel shaft materials are requested, the applicable material grade and configuration must be confirmed.

 

Brake Integration: Brake-equipped configurations may be reviewed based on the required braking torque, electrical supply, mounting interface, duty requirements, and compatibility with the selected motor.

 

Environmental Requirements: Special environmental requirements, including high-humidity or coastal applications, should be submitted for engineering review. Any protective treatment and its applicable environmental limits must be confirmed before ordering.

 

 

Frequently Asked Questions

 

 

Q: What are the delivery lead times for standard and customized motors?

A: Delivery lead times depend on model availability, order quantity, and configuration. Standard models may be available for shipment within the supplier's confirmed dispatch window. Custom electrical configurations and other engineering modifications require a separate production schedule, confirmed after technical review and approval of the relevant drawings. Please confirm the estimated dispatch date and production lead time when requesting a quotation.

Q: Can these motors operate with variable frequency drives (VFDs)?

A: VFD compatibility should be confirmed for the selected motor model and operating profile. For low-speed constant-torque applications, the permissible speed range, cooling arrangement, insulation requirements, and any output derating should be reviewed with the manufacturer. Independent forced cooling may be required for certain operating conditions. Any voltage-spike withstand rating or inverter-duty insulation claim should be supported by model-specific technical documentation.

Q: What is the calculated L10h bearing life?

A: The calculated bearing life depends on the bearing type, applied loads, operating speed, lubrication conditions, and installation. Please request the model-specific bearing-life calculation when a defined L10h value is required for engineering evaluation. Any published life figure should identify the applicable configuration and calculation assumptions.

Q: How is batch-to-batch consistency managed for OEM projects?

A: Production controls, inspection procedures, and traceability arrangements should be documented for the relevant product range. Where individual electronic test reports are available, their coverage and recorded test parameters should be confirmed for the relevant motor models and orders. Material traceability and production records should be described according to the supplier's actual quality management procedures.

Q: What documentation is available with sample shipments?

A: The available documentation should be confirmed for the selected motor model and sample order. Depending on the agreed scope, the technical package may include dimensional drawings, routine-test documentation, balancing records, applicable material compliance documents, and installation, operation, and maintenance instructions. Please specify any additional documentation required for engineering evaluation before the sample order is confirmed.

Q: How can custom mounting dimensions or non-standard flange interfaces be requested?

A: Please submit the application drawing or interface requirements, including shaft dimensions, flange bolt-circle diameter, center pilot dimensions, and relevant tolerance requirements. The engineering team can then review the requirements and confirm feasibility, any design limitations, and the drawing delivery schedule. The review timeline depends on the completeness and complexity of the submitted information.

We are one of the most professional electric motor manufacturers and suppliers in China, specialized in providing high quality products and efficient solutions to global clients. Welcome to buy durable electric motor for sale here from our factory. For price consultation, contact us.

Servo Motor, Three phase Asynchronous Motor, electric motor

(0/10)

clearall