What to do if Planetary Reducer temperature rises too high

Nov 06, 2026

Solutions for Excessive Temperature Rise in  Planetary Reducers

Excessive temperature rise in European-style crane lifting reducers accelerates lubricant deterioration and seal aging, severely affecting the equipment's operational accuracy and lifespan. In such cases, it is recommended to investigate and address the issue from the following four aspects:

European-style crane lifting reducer
 

1. Check the Lubrication System and Oil Condition
Poor lubrication is the most common cause of excessive temperature rise. First, check if the lubricating oil level inside the planetary reducer is sufficient. Insufficient oil will lead to increased friction, while excessive oil may cause oil churning and heat generation. Simultaneously, confirm whether the lubricating oil is aged, deteriorated, or contaminated with impurities. If an oil film cannot form effectively, dry friction will occur between metal parts. In this case, replenish or completely replace the lubricating oil with a matching high-performance type according to the manufacturer's specifications.

2. Check the Load and Operating Conditions
Prolonged overload operation will cause the gears and bearings inside the planetary reducer to bear stress beyond the design range, leading to a sharp increase in frictional power consumption and generating heat far exceeding the heat dissipation capacity. It is necessary to verify whether the actual load of the equipment exceeds the reducer's rated capacity and check for frequent starts and stops or excessively high input speeds. Adjusting the equipment's operating parameters to ensure stable operation within its rated load and speed range is the fundamental measure for controlling temperature rise.

3. Improve Heat Dissipation and Ventilation

If the planetary reducer is installed in a confined space, or if dust and oil accumulate around it, heat cannot dissipate in time, creating a "heat buildup" effect. The debris on the reducer's heat sink should be cleaned to ensure proper airflow. For equipment operating continuously in high-temperature environments, consider installing a cooling fan, air duct, or even an external water-cooling or air-cooling circulation system near the reducer to enhance active cooling.

4. Inspect Internal Mechanical Wear and Assembly

If the above external factors have been ruled out and the temperature rise remains severe, an internal mechanical fault may be present. Gear wear, bearing damage, shaft misalignment, or improper assembly clearances can all lead to an abnormal increase in internal frictional resistance. In this case, the machine needs to be stopped and disassembled for inspection. Check for abnormal wear, pitting, or jamming in core components, recalibrate the concentricity of the motor and reducer, and replace damaged parts to eliminate internal sources of abnormal frictional heat.

If you are interested in Planetary Reducers and would like to obtain more detailed information, please contact Shandong Guomao Guotai Reducer for in-depth consultation. We have a highly professional team that is always on standby, ready to listen attentively to your specific needs.