Operating Instructions For Cycloidal Pin-Wheel Speed Reducers
Apr 06, 2026
Applications
The cycloidal pin-wheel reducer utilizes the principles of cycloidal pin-tooth meshing and planetary transmission; therefore, it is commonly referred to as a planetary cycloidal reducer. This planetary cycloidal pin-wheel reducer finds widespread application across various industries-including petroleum, environmental protection, chemical engineering, cement, conveying systems, textiles, pharmaceuticals, food processing, printing, hoisting, mining, metallurgy, construction, and power generation-serving as a drive or speed-reduction mechanism. The unit is available in various mounting configurations, such as horizontal, vertical, dual-shaft, and direct-coupled types. Its unique, smooth-operating structure allows it to replace standard cylindrical gear reducers and worm gear reducers in many scenarios; consequently, the planetary cycloidal pin-wheel reducer is extensively utilized across diverse industries and fields, enjoying widespread popularity among users.
Operating Conditions
1. The cycloidal pin-wheel reducer is suitable for continuous-duty applications and permits rotation in both forward and reverse directions. However, certain models of the cycloidal pin-wheel reducer are designed for unidirectional rotation only. 2. The rated input shaft speed is 1500 rpm. For input power ratings exceeding 18.5 kW, it is recommended to pair the reducer with a 6-pole motor operating at 960 rpm. 3. For horizontally mounted cycloidal pin-wheel reducers, the standard operating position is strictly horizontal. During installation, the maximum allowable horizontal inclination angle is generally limited to less than 15°. If the inclination exceeds 15°, additional measures must be implemented to ensure adequate lubrication and prevent oil leakage. 4. The output shaft of the cycloidal pin-wheel reducer must not be subjected to significant axial or radial loads; should such substantial loads be present, appropriate supplementary measures must be adopted.
Lubrication
1. Under normal operating conditions, horizontally mounted cycloidal reducers utilize oil-bath lubrication, with the oil level maintained at the midpoint of the oil sight glass. In harsh operating environments or when ambient temperatures are elevated, a circulating lubrication system may be employed. 2. At normal ambient temperatures, the cycloidal pin-wheel reducer typically utilizes No. 40 or No. 50 mechanical oil for lubrication. To enhance performance and extend the service life of the reducer, the use of No. 70 or No. 90 extreme-pressure (EP) gear oil is recommended. Furthermore, when operating in environments characterized by extreme high or low temperatures, the selection of the appropriate lubricant should be carefully re-evaluated. 3. When installing the planetary cycloidal pin-wheel reducer vertically, strictly ensure that the oil pump does not run dry, in order to prevent damage to the reducer's internal components. 4. To add oil, simply unscrew the breather cap located on the upper section of the housing. To drain oil, unscrew the drain plug located on the lower section of the housing to release the used oil. Note that the reducer is shipped from the factory without any internal lubricating oil. 5. After the initial oil fill, the oil should be replaced with fresh oil after 100 hours of operation (ensuring that any residual used oil is thoroughly flushed out). Subsequently, for continuous operation, the oil should be replaced every six months (based on an 8-hour workday schedule). Under harsh operating conditions, the oil change interval should be appropriately shortened. Experience has shown that regular cleaning and oil changes (e.g., every 3 to 6 months) play a crucial role in extending the service life of the reducer. During operation, the lubricating oil level should be monitored and replenished frequently. 6. Reducers are pre-filled with lubricating grease at the factory; this grease should be replaced every six months. The recommended grease types are Aluminum Disulfide-2# or 2L-2# Lithium-based lubricating grease.






