Introduction To Cycloidal Pin-Wheel Speed Reducers
Apr 05, 2026
The cycloidal pinwheel reducer is a novel transmission device that utilizes the principle of planetary gearing and employs cycloidal pin-tooth meshing. The entire transmission assembly of the cycloidal pinwheel reducer can be divided into three parts: the input section, the reduction section, and the output section. A double eccentric sleeve, offset by 180 degrees, is mounted on the input shaft. Two roller bearings-referred to as "turning arms"-are fitted onto this eccentric sleeve, forming an "H" mechanism. The central bores of the two cycloidal wheels serve as the raceways for the turning-arm bearings on the eccentric sleeve; these cycloidal wheels then mesh with a set of circumferentially arranged pin teeth on the pinwheel gear to form an internal-meshing reduction mechanism with a tooth-difference of one tooth. (To minimize friction, in reducers with lower reduction ratios, the pin teeth are fitted with pin sleeves.)
When the input shaft rotates the eccentric sleeve through one full revolution, the motion of the cycloidal wheels becomes a complex planar motion involving both orbital revolution and self-rotation. This occurs due to the specific characteristics of the cycloidal wheel's tooth profile curve and the constraints imposed by the pin teeth on the pinwheel gear. As the input shaft completes one forward revolution-during which the eccentric sleeve also rotates once-the cycloidal wheels rotate by a displacement of one tooth in the opposite direction, thereby achieving speed reduction. Subsequently, through a W-type output mechanism, the slow self-rotational motion of the cycloidal wheels is transmitted to the output shaft via a series of pins, resulting in a reduced output speed.






